Driver Door Mirror Switch
| 1. |
Disconnect the negative battery
terminal. |
| 2. |
Remove the front door trim.
(Refer to the BD group - "Front
door") |
| 3. |
Remove the screws from power window switch (A)
and connectors (B).
|
| 4. |
Remove the driver power window switch (A) from
front door trim.
|
Be careful not to damage the hook when
removing the switch
module. | |
Driver Door Mirror Switch
| 1. |
Install the driver power window switch and
connectors. |
| 2. |
Install the front door
trim. |
| 1. |
Remove the front door trim and power door
mirror switch module (A).
|
| 2. |
Check for the continuity between terminals of
power door mirror switch according to the table.
|
